StoreEver Tape Storage
1748060 Members
5435 Online
108758 Solutions
New Discussion юеВ

Re: cannot install atdd driver correctly on HPUX 11

 
Michal_25
Occasional Contributor

cannot install atdd driver correctly on HPUX 11

Hello,

After install atdd driver and rebuild kernel and restart machine,

I have in ioscan -fnC tape entry like this:
тАж
tape 10 0/10/0/0.5.2.255.0.0.0 atdd CLAIMED DEVICE IBM ULTRIUM-TD2
тАж

but I donтАЩt have patch to device file just nothing.


Maybe somebody have this problem before, a wont backup this server to L180 tape library from data protector, so first of all I must install tape driver correctly.

Thanks a lot,

BR,

MM

4 REPLIES 4
Luk Vandenbussche
Honored Contributor

Re: cannot install atdd driver correctly on HPUX 11

Hi MM,

Try,

insf -e
ioscan -funC tape
Michal_25
Occasional Contributor

Re: cannot install atdd driver correctly on HPUX 11

I already done.

insf -e

Nothing happened.


BR.

MM
DCE
Honored Contributor

Re: cannot install atdd driver correctly on HPUX 11


Michal,

Here is a thread on ATDD drivers that might interest you.

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=2707


Also, here are my notes from when I installed it
Install the ATDD tape drivers
swinstall ├в s atdd.3.5.0.22.bin

When the swinstall command runs, you are prompted with the question,
Would you like to activate the Medium Changer support by ACDD (Y/N)?

answer N to allow the HP native changer driver to configure these Medium Changer devices.


Michal_25
Occasional Contributor

Re: cannot install atdd driver correctly on HPUX 11

Thanks a lot,

/opt/OMImag/bin/atdd_mksf | sh

works:)

BR,

MM