StoreEver Tape Storage
1748129 Members
3453 Online
108758 Solutions
New Discussion юеВ

Re: changing SCSI id on DLT tape drive.

 
SOLVED
Go to solution
stevegray
Frequent Advisor

changing SCSI id on DLT tape drive.

I have to replace my DLT tape drive.

I have a SCSI ID ot 15 on the old one.

How do you change the new one to match?

Do you pull the SCSI ID tab and change it
internally?

Thanks
Steve
8 REPLIES 8
Luk Vandenbussche
Honored Contributor

Re: changing SCSI id on DLT tape drive.

Can you give a partnumber of your tape drive please.

This action depends on the model
vinu_2
Advisor
Solution

Re: changing SCSI id on DLT tape drive.

hi,
on the back side of DLT drive you can find ID button. Press on the button for getting your desired id.


Thanks,

Vinu
Think before whatever you are doing
stevegray
Frequent Advisor

Re: changing SCSI id on DLT tape drive.

Part number is C6379-63001.

I tried pushing the button and nothing
happens. I pushed on the black tabs and
the plastic where the number appears.

The number does not change.

Any suggestions?

Thanks
Steve
stevegray
Frequent Advisor

Re: changing SCSI id on DLT tape drive.

Thanks for the replies.

The button on the back is jammed.

That is why I could not change it.

I guess I will sending it back and get
another.

Steve
vinu_2
Advisor

Re: changing SCSI id on DLT tape drive.

hi,
you have to use a needle or pen. becuase the button is very small. U have to press the button using the needle or pen through the hole. then the number will get change.

regards,
Vinu
Think before whatever you are doing
vinu_2
Advisor

Re: changing SCSI id on DLT tape drive.

plesase assign points if u can
Think before whatever you are doing
stevegray
Frequent Advisor

Re: changing SCSI id on DLT tape drive.

Points already assigned.

Thanks again.
Steve
stevegray
Frequent Advisor

Re: changing SCSI id on DLT tape drive.

Closed.