StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

command to check media quality

SOLVED
Go to solution
kholikt
Super Advisor

command to check media quality

Is there any other command to check the quality of a medium?

I find out that omnimm -list_pool ESC_HTL_htlsgsap_dev2 is a bit strange because the medium label will be cut off if the label is too long. So this is a bit tough for scripting

Status Medium Label Location Full Protected
===============================================================================
Good ESC_HTLSAPDEV2_FRI_ No 01/20/05 07:03:23
Good ESC_HTLSAPDEV2_SAT_ No 01/21/05 07:03:45
Good ESC_HTLSAPDEV2_TUE_ No 01/24/05 07:03:49
Good ESC_HTLSAPDEV2_MON_ No 01/30/05 07:04:21
Good ESC_HTLSAPDEV2_SAT_ No 01/28/05 07:04:08
Good ESC_HTLSAPDEV2_THU_ No None
Good htlsapdev2_fs_aug05 Yes Permanent
Good ESC_HTLSAPDEV2_SUN_ No 01/29/05 07:03:35
Good ESC_HTLSAPDEV2_SUN_ No 01/22/05 07:03:17
Good ESC_HTLSAPDEV2_FRI_ No 01/27/05 07:03:55
Good ESC_HTLSAPDEV2_THU_ No 01/26/05 07:03:57
Good ESC_HTLSAPDEV2_WED_ No 01/25/05 07:04:18
Good ESC_HTLSAPDEV2_WED_ No None
Good ESC_HTLSAPDEV2_TUE_ No 01/31/05 07:04:19
Good ESC_HTLSAPDEV2_MON_ No 01/23/05 07:04:08
Good ESC_HTLSAPDEV2_TUE_ No None
abc
1 REPLY
Claudio Ruzza_1
Valued Contributor
Solution

Re: command to check media quality

Get LTT and run the Media validation Test

http://www.hp.com/support/tapetools

Install it, select your tape drive, run the Media Validation Test

HTH
Claudio