Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

connot see MSL6060 drives and changer

Armin Norouzi
Frequent Advisor

connot see MSL6060 drives and changer

Hi,
I've an MSL6060 with 4 LTO2 drives and 2 NSRs. I can see only 2 drives and one NSR from a Linux server, but on a Win2003 server, I can see all 4 drives, changer and both NSRs. Can you help me to fix the problem on Linux server. This is the output of lssg:

[root@rhovdp ~]# lssg
sg0 0,0,0,0 HP HSV210 5110
sg1 0,0,2,0 HP Ultrium 2-SCSI F6AW
sg2 0,0,2,1 HP Ultrium 2-SCSI F6AW
sg3 0,0,2,2 HP NS E1200-160 5944

Thanks in advance
2 REPLIES
Víctor Cespón
Honored Contributor

Re: connot see MSL6060 drives and changer

Check the mapping on the first NSR (the one that has the library controller)
The linux server must have no mapping assigned or a empty map assigned.
Eblyn Solis
Honored Contributor

Re: connot see MSL6060 drives and changer

Hi Armin,

Maybe this help you:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01426627&jumpid=reg_R1002_USEN

Regards
Please assign a kudo to this post, if you find it useful.