HPE Community
StoreEver Tape Storage
1752815 Members
5887 Online
108789 Solutions
New Discussion юеВ

Re: converting MSL6000 from SCSI to FC config

 
otukile
Frequent Advisor

тАО06-23-2008 06:25 AM

тАО06-23-2008 06:25 AM

converting MSL6000 from SCSI to FC config

I have an MSL6060 populated with 4 LTO-2 drives in SCSI config. Is it possible to convert the config to FC one? if so, is it just a matter of getting 2 NSR routers and fibre cables and rearange the tape drive cables for FC config?

Any documentation on this would help.
Don't panic
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО06-23-2008 06:32 AM

тАО06-23-2008 06:32 AM

Re: converting MSL6000 from SCSI to FC config

Not esay to find, but here it is:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00873663/c00873663.pdf


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО06-23-2008 06:36 AM

тАО06-23-2008 06:36 AM

Re: converting MSL6000 from SCSI to FC config

The user manual:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00637161/c00637161.pdf

Don't forget to setup the mapping!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО06-23-2008 06:46 AM

тАО06-23-2008 06:46 AM

Re: converting MSL6000 from SCSI to FC config

Please don't forget to read and follow this:

http://forums12.itrc.hp.com/service/forums/helptips.do?#33

If someone has a similar problem in future he will easier find help.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.