HPE Community
StoreEver Tape Storage
1752815 Members
6091 Online
108789 Solutions
New Discussion

dat24e & Adaptec 2930U

 
BR695553
New Member

‎06-24-2002 02:26 AM

‎06-24-2002 02:26 AM

dat24e & Adaptec 2930U

Can anyone suggest the correct cable to purchase, alternatively can anyone point me to a web page that will show me what the connectors are on the various HP cables ?
0 Kudos
Reply
1 REPLY 1
CA756694
Honored Contributor

‎06-24-2002 10:42 PM

‎06-24-2002 10:42 PM

Re: dat24e & Adaptec 2930U


Consulting the Adaptec website, I see that the 2930u has a 50 pin high density external connector (is it thumb screw?) On the HP website I see that the Dat24e has a 50pin low density connector.

So, a 50 pin high density to a 50pin low density is required.

HP part number is K2296 (K2296-60001).

Adaptec have a useful resource over on their site that shows pictures etc:

http://www.adaptec.com/onlinestore/cbl_sltr/us_cbl-selector.html

One of their part numbers is ACK-H2L-1m

cheers

John



cheers

Eagles may soar in the clouds but weasels don't get sucked into jet engines
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.