StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

e1200-160 for MSl6000

sco.chris6
Occasional Contributor

e1200-160 for MSl6000

I have MSL6000 with 4*LTO2 Drive & 2*NSR-e1200-160, I can't save any configuration on e1200-160 because, eveytime I saved IP and MAP config and when I do turn off the machine or disconnect power cord I lost any configuration.
Please help me.
4 REPLIES
Jorge Pons
Trusted Contributor

Re: e1200-160 for MSl6000

Hi

Can you try with serial cable

Regards, Jorge
sco.chris6
Occasional Contributor

Re: e1200-160 for MSl6000

hi,
I first connect with serial port and config IP address, 2nd connect with RJ-45 port and config MAP & other configuration also saved. whenever I power off system or disconnect power cord, every config will lost.
hvhari
HPE Pro

Re: e1200-160 for MSl6000

In that case , this is most likely to be a HW issue with the NSR. Have you contacted HP for this ?
Regards,
Hari

If this post was useful , click the Kudos Star on the left side to say Thanks!
Marino Meloni_1
Honored Contributor

Re: e1200-160 for MSl6000

Does that occurs on both NSR?
Do you have latest FW installed?
Do you have any other HP tape library in the same LAN?