StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

hp 1/8 G2 LTO-4 Ultr 1760 SAS Autoloader (hp Part Number AK377A) - Default Administrator Password

Michael Scheinoha
Frequent Advisor

hp 1/8 G2 LTO-4 Ultr 1760 SAS Autoloader (hp Part Number AK377A) - Default Administrator Password

Is there a Default "Administrator" Password that comes with this Autoloader for RMI access ?

I am trying to set the "Administrator" password from the OCP, and it says "The administrator password must be exactly eight digits consisting of the numbers 0 through 9."

When I try to set a password, I receive a "Password Invalid" error message.

I am able to login as User with a password I was able to guess, but no luck on the "Administrator" password, nor guessing one.

Autoloader Firmware Version 2.10
LTO-4 Tape Drive Firmware Version U26W
4 REPLIES
SKR_1
Trusted Contributor

Re: hp 1/8 G2 LTO-4 Ultr 1760 SAS Autoloader (hp Part Number AK377A) - Default Administrator Password

Try

12344321
43211234

Thanks

SKR
Michael Scheinoha
Frequent Advisor

Re: hp 1/8 G2 LTO-4 Ultr 1760 SAS Autoloader (hp Part Number AK377A) - Default Administrator Password

12344321 and 43211234 did not work.

Is there a software bug with the OCP not accepting a change to the "Administrator" password code (eight-digit number) ?

Thank you.

Michael Scheinoha
Frequent Advisor

Re: hp 1/8 G2 LTO-4 Ultr 1760 SAS Autoloader (hp Part Number AK377A) - Default Administrator Password

I determined the "Administrator" password from the person that changed it from the unset (null digits) password that came from the factory. Once set, if it is forgotten, you have to open up a Support Case with hp to get a temporary Administrator password.
Michael Scheinoha
Frequent Advisor

Re: hp 1/8 G2 LTO-4 Ultr 1760 SAS Autoloader (hp Part Number AK377A) - Default Administrator Password

Page 43 of the User and Service Guide, March, 2008 says it ships with a "null" password from the factory. In this case, someone reset it to a value they were able to tell me, so I was able to log in to the autoloader.