StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

hp msl-6030 tape library

khilari
Regular Advisor

hp msl-6030 tape library

MSL 6030

1)Install the library hardware and Command View TL
2)Loading the library hardware with up to 10 tape media cartridges
3)Configuring Interface Manager and Interface Controller(s), and configuring zoning on Fiber Channel switches
4)Configuring backup server host to recognize device
5)Conduct installation verification tests such as power-on self test (POSTs) for the product, normal product operation, and that current device software and firmware are loaded.

any body has any idea on any of the above stated modules, kindly get back.

2 REPLIES
Steven E. Protter
Exalted Contributor

Re: hp msl-6030 tape library

Shalom Mujtaba,

I would check that the proper driver is installed in the HP-UX kernel, probably stape, but do check the install procedures.

After connecting and booting the HP-UX server, run ioscan -fnC tape

This will show you whether the device is properly claimed or not.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Luk Vandenbussche
Honored Contributor

Re: hp msl-6030 tape library

Hi you need the following drivers in your kernel
stape, autoch