StoreEver Tape Storage
1748289 Members
3128 Online
108761 Solutions
New Discussion

Re: msl2024 with flaxfabric

 
hamze
Occasional Contributor

msl2024 with flaxfabric

I instaled dataprotector on one off blades connected outside with flexfabric module and using an msl 2024 device connected to this server but all the back job fails with this error
 request could not be performed because of an I/O device error.
But when a i install dataprotector on a rackmounted server (not blade ) the job will success normal, so the problem is between the flexfabric and the msl2024, is there any special configuration should be done in virtual connect or dataprotector

Thankmyou
3 REPLIES 3
giladzzz
Honored Contributor

Re: msl2024 with flaxfabric

Hi

How is the MSL2024 connected to the blade through fabric?

whats your operating system?

Regards

 

Eric_de_Lange
Frequent Advisor

Re: msl2024 with flaxfabric

What is the error ?
Cmorrall
Frequent Advisor

Re: msl2024 with flaxfabric

What is the exact blade server model?