cancel
Showing results for 
Search instead for 
Did you mean: 

msl500 issue

bobby_31
Occasional Advisor

msl500 issue

Hi all

I am getting this error while dumping the volumes to my msl5000 series tape library
-==-=-START=-=-=-
(scsi1:A:1:0): Unexpected busfree in Data-out phase
SEQADDR == 0x82
st0: Error 70000 (sugg. bt 0x0, driver bt 0x0, host bt 0x7).
st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1).
st0: Error on write filemark.
st0: Error 10000 (sugg. bt 0x0, driver bt 0x0, host bt 0x1).
-=-=-END=-=-=-

The Controller is
SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)

This was working fine and started giving error two days back , My guess is something wrong with the controller , any help is appreciated


-Bobby

bobby
2 REPLIES
David Ruska
Honored Contributor

Re: msl500 issue

This sounds like a low level connectivity issue. I would check to make sure the cables are properly/fully seated, not being pulled on, no bent pins, etc.
The journey IS the reward.
bobby_31
Occasional Advisor

Re: msl500 issue

HP replaced the power supply , However I think it was the connetion as i re arranged the cables at the same time
bobby