Showing results for 
Search instead for 
Did you mean: 




Hi all,

i have a MSL Tape library 6060. There are two power supplies in this tape library . one power supply is damaged , with one power supply the tape library is getting ON but ther is no display on its front panal .
i change the faulty power supply but still tape library is not getting ON


Asim Rana
Kurt Beyers.
Honored Contributor

Re: msl6060


Are the lights at the back of the power supplies burning? Just to be sure that they are getting electricity.

If the library is on power and you can't switch it on, there is obviously a hardware defect. So open a call at HP for it, they will solve it respecting the SLA in your hardware support contract.

Marino Meloni_1
Honored Contributor

Re: msl6060

Check if the green led is on on the back,
try to swapp the two powers suply,
try to swapp the two power cord
try with one power supply at a time in each location.

if this do not give you result, as Kurt said, call HP

remember to touch the lcd pannel to switch it on