Showing results for 
Search instead for 
Did you mean: 

replace MSL5026

Go to solution
Frequent Advisor

replace MSL5026


Our MSL5026 has a problem and we have to replace it with the same one.
please note that the dlts cartridges and hp StorageWorks network storage router e1200-160 of the failed msl will be place on the new one.
My question is :
this replacement needs any changes of actual configuration on the host (hpux 11.11) or no change to make and it will work.

Thanks for any help.
Víctor Cespón
Honored Contributor

Re: replace MSL5026

If you cable the new MSL the same way, and assign the same SCSI ID to the robotic arm and the drives, the configuration on the NSR should still be valid, so the mapping will work and the servers will see the same devices.