I was Trying to Update VLS 6870 to 1.1.0, now I could not form again ether 0.

[Eduardo Soto Clemente]

Hi,

After i finished Update firmware 1.1.0,I could not form again the ether 0, at the library.
someone has information how i could set the ip address at the lan.

someone know if there where an issue with the new version of firmware??

Library was working correctly before update,

Best Regard,

Eduardo Soto

[Rob O'Reilly]

Hello,,

Please refer to this Customer Notice and see if it helps.

Document ID is c00882126


Thanks,
Rob O.

[Eduardo Soto Clemente]

I read the document, and was clear to me.
We need to set all the values, not only 1 or 2, the process is put all values before to do the command: commitConfig.

The problem was save and the library is workink properly again

Tks for your help,

Best regards,

Eduardo Soto

[Eduardo Soto Clemente]

The las commnent was solution.Thanks for your help
eduardo Soto