StoreOnce Backup Storage
Showing results for 
Search instead for 
Did you mean: 

SAN and Storeone

Occasional Contributor

SAN and Storeone

hi, good day to all people,

 I ihave a SW SAN 5100 Brocade with version firmware v6.4.3c (to old) and I need chek if this version cant work with astoreone 5100.

Is it possible any person in this forum tell me if this configuration work or where I can chek this information please?


Honored Contributor

Re: SAN and Storeone


It will probably work you can look here

HPE Data Availability, Protection and Retention Compatibility Matrix

or in  HPE SAN Design Reference Guide 



Sheldon Smith
Honored Contributor

Re: SAN and Storeone

Note: A Brocade 5100 is also known as the HP StorageWorks 8/40 SAN switch. The 5100 can be upgraded, one minor revision at a time (6.4 > 7.0 > 7.1 ...) to v7.4.1e.
A current support contract with Hewlett Packard Enterprise may be needed to download individual firmware bundles from the HPE Support site.

Note: While I work for Hewlett Packard Enterprise, all of my comments (whether noted or not), are my own and are not any official representation of the company.
If my post was useful, click on my KUDOS! thumb below!