StoreOnce Backup Storage

StorceOnce VSA 10 Tb

New Member

StorceOnce VSA 10 Tb

Hi all,

We have a StoreOnce VSA 10 TB on Hyper-V. The system is connected directly to the backupserver.
What will be the best way to get the biggest troughput. I started with bondig 2 interfaces, but only on is used. Next I tried to use MPIO with load balancing. Biut the ISCSI Target is shown on one Interface only. I think MPIO must set up in Storeonce. How can I do? I did not find any way.