StoreOnce Backup Storage

StoreOnce update

 
SOLVED
Go to solution
Vkvetner
Occasional Visitor

StoreOnce update

Hello.

We're going to update our StoreOnce 3640 from 4.1.2 to 4.2.1. We've two and we're planning to upgrade it two steps: at first - we uprgading first SO and wathcing, if everythong is ok. At second - the second one.

Question: will replication work correctly while one SO will be with 4.2.1 firmware and the second - with 4.1.2 or we must break replication?

2 REPLIES 2
Josh94K
HPE Pro
Solution

Re: StoreOnce update

Hello @Vkvetner 

Technically speaking, there should be no issues running replication between SO units having a firmware mismatch.
However, it would be best to perform this activity between units having the same firmware level.

 

@Vkvetner  I hope this helps!
If you feel this was helpful please click the KUDO! thumb below.

 

 

Note: "While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company."

Accept or Kudo

I work for HPE.
Vkvetner
Occasional Visitor

Re: StoreOnce update

Ok, thanks!