VLS 6100 automigration option not available

[Mero]

Hi,
We have two VLS 6100 and we plan to use it for disk backup
the AUTOMIGRATION option is not appearing on the VLS GUI

So am Asking if we upgrade the firmware version did this option appear or we should go for another VLS model

This harware is out of warranty and HP ca't give us online support

Firmware Version used now is 1.0.12 old one and should be upgraded

My seconds questions is can we download the new firmware from HP site as for this model no more option on HP site

Thanks for your help

[Johan Guldmyr]

Hello, took me a while to find but if you look in the quickspecs of the VLS 6000:

http://h18004.www1.hp.com/products/quickspecs/12233_div/12233_div.html

"The HP StorageWorks 6200 and 6600 Virtual Library Systems support Automigration. "

Looks like you need to run VLS firmware 2.x to get automigration, and the 6100 only goes to 1.2.0

Here is the 1.2.0 firmware:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=470419&prodTypeId=12169&prodSeriesId=470405&swLang=8&taskId=135&swEnvOID=54

[Johan Guldmyr]

And just to double-check, here is the VLS6100, 6500 and 6800 quickspecs:

http://www.datasystems.ru/documents/html/StorageWorks6000VirtualLibrarySystem/12233_div.html
This doesn't have the word "migration" at all.

[Mero]

Thanks johan,

From the firmware Prerequisites it like to go to the 1.2.0 you have to be at least with 1.1.0

and the 1.1.0 version is not available from the revision history

any idea about that pls

thanks

[Johan Guldmyr]

Here is a 1.1.0 QR CD:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=US&swItem=co-60699-1&mode=4&idx=0&prodTypeId=12169&prodSeriesId=470405

Found it by searching for "V1.1.0 VLS" on Business Support Center.

[Mero]

thanks johan for your help (Points assigned)

I will try to upgrade to 1.1.0 as for that it can't be done by GUI and I will try also to go to the latest one

hope to get the automigration option

Regards

[Johan Guldmyr]

It's definitely worth a shot!

[Dennis Handly]

>thanks johan for your help (Points assigned)

Did you remember to hit the Submit button?

[Mero]

then problem is when I downloaded the ISO compressed file

When Iam trying to boot with the CD I get drive failer
R (retry) A(Abort) F(FAIL)

I changed the external CD drive two times but still showing the same error

so am not able to upgrade to the latest one because am stuck in 1.0.12

Server used with the VLS is running LINUX redhat any Ideas on how we can run the upgrade on diffrent way?

thanks

[Johan Guldmyr]

But, does the CD start to load it at all?

If you put the disk in another machine, like a desktop, do you see anything on it?

I just tried to mount the .ISO on my desktop and I can see files on it.