VLS12000 How to extend ports and tape drives on a library?

[KimHansen]

Hi,
I need to have more Tape drives and slots on my Virtual Library. How can I extend this without destroy and make a new one?

[Víctor Cespón · Accepted solution]

Editing a Virtual Library's Slots and Drives
To edit the slots and drives of a virtual library:
1. Open a Command View VLS session and log in as the administrator. See â Opening a Command View VLS Session from a Web Browserâ on page 105.
2. Select the System tab.
3. Expand Chassis in the navigation pane.
4. Select Virtual Libraries in the navigation pane.
5. Select Edit Virtual Libraries in the task bar.
6. On the Edit Virtual Libraries screen, select the library you want to edit from the list.
7. Change the number of slots and/or the number of drives in the appropriate fields.
8. Select Next. A warning message indicates that some services will stop if you make any changes.
9. Select Edit Library to continue. The screen displays a â please waitâ message.
You may select Return to cancel if you decide not to make the change.
10. Log out of the GUI and close the browser window. Log back in approximately fifteen minutes later.
This manual disconnect ensures that the edit screens refresh.
11. Check the library you edited on the System tab to verify the change.

The answers to your two questions are on the library user guide, please just download and read it.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02032343/c02032343.pdf

[KimHansen]

Thanks, this really solved my problem!

[KimHansen]

Solved by the instructions :-)