StoreOnce Backup Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

VLS9000 and sun solaris 9/10

Vitek
Advisor

VLS9000 and sun solaris 9/10

Hi guys!

I have installed VLS9000 and create ESL library with 12 drives on it. It was presented with default (no) mapping to solaris host. VLS and host connected via SAN switch, and they are in same zone. But host OS see 2 media changers (ESL) and 16 drives and can't to use them.

c1 fc-fabric connected configured unknown
c1::50025b3a783b0000 med-changer connected configured unknown
c1::50025b3a783b0001 unavailable connected configured unknown
c1::50025b3a783b0010 med-changer connected configured unknown
c1::50025b3a783b0011 unavailable connected configured unknown

/dev/sg/c0tw50025b3a783b0000l0: Changer: "HP ESL E-Series 2.00"
/dev/sg/c0tw50025b3a783b0000l1: Tape (/dev/rmt/41): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0000l2: Tape (/dev/rmt/40): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0000l3: Tape (/dev/rmt/39): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0000l4: Tape (/dev/rmt/38): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0000l5: Tape (/dev/rmt/37): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0000l6: Tape (/dev/rmt/36): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0000l7: Tape (/dev/rmt/35): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0000l8: Tape (/dev/rmt/34): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l0: Changer: "HP ESL E-Series 2.00"
/dev/sg/c0tw50025b3a783b0010l1: Tape (/dev/rmt/19): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l2: Tape (/dev/rmt/13): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l3: Tape (/dev/rmt/12): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l4: Tape (/dev/rmt/11): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l5: Tape (/dev/rmt/10): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l6: Tape (/dev/rmt/9): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l7: Tape (/dev/rmt/8): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE
/dev/sg/c0tw50025b3a783b0010l8: Tape (/dev/rmt/7): "HP Ultrium 3-SCSI R210" : NOT-IN-ST-CONFIG-FILE

I think, that OS required soft (like multipathing) and drivers. Could advice please?
Thanks!
Viktor.
1 REPLY
Vitek
Advisor

Re: VLS9000 and sun solaris 9/10

Some more information. VLS connected to 2 hosts with solaris OS. But only one host can perform backups. Second host hang on mounting stage.