storeonce identify the device

[arie_5]

i nead to identify the storeonce in the DataCenter.

is there a way to make all/some of the light on device to blink for 5 minutes?

[Cali]

Hello,

the StoreOnce has a Blue LED called UID.

You can enable it in the iLO Web Console (look for UID), or if you Open the Remote Console inside iLO it is automatically blinking blue.

Launching the iLO web interface
Procedure
1. On the main menu, select Settings.
2. In the Hardware section, click the Integrated Lights Out (iLO) Configuration panel.
3. On the Integrated Lights Out (iLO) Configuration screen, expand the Actions menu and select Launch iLO.

Cali

[SanjeevGoyal]

Hello.

Follow the below link.

HPE StoreOnce 3620, 3640, 5200, 5250,and 5650 Systems User Guide For StoreOnce software version 4.1.1 (Page no 181)

https://content.etilize.com/User-Manual/1053323444.pdf

Viewing hardware components (hardware monitoring)

Locating StoreOnce Systems

You can turn on the UID (unit identification) light for a StoreOnce System. Turning on the light helps to
physically locate a StoreOnce system in a rack. Icons indicate whether the light is turned on ( ) or off
( ).
 

Procedure
1. On the main menu, select Settings.
2. In the Hardware section, click the Hardware Monitoring panel.
3. On the Hardware Monitoring screen, expand the Actions menu and select Locate system

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,

[SanjeevGoyal]

Hello,
Please let me know if you have any quires.
If you feel this was helpful please click the KUDOS! thumb below and accept the solution.
Regards,