Add FOM into CMC

[pcyber]

Hi, I'd like to known how to add FOM into CMC to a Management Group. Now there are two System (P4300) and two Virtual Manager, we installed FOM (Fail Over Manager) because this configuration in not "High Fault Tolerance". When I try to Power Off a System (P4300) my VM freeze. I tried add it to Management group with the following error (attached)

How add FOM to Management group or solve this problem?

Thanks

[bryan_hadzik · Accepted solution]

When you start using the FOM, you no longer need the virtual manager. Delete the virtual manager, so only the 2 P4300s are left, then re-add the FOM.

[pcyber]

Thank you it's OK