StoreVirtual Storage
1748280 Members
4072 Online
108761 Solutions
New Discussion

Re: Check uptime P4300

 
ibeerens
New Member

Check uptime P4300

Hello,

 

How can I check the uptime on two P4300s G2? I want to check this because of the "Linux Kernel panic causes storage systems to go offline"see:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=110&prodSeriesId=4118659&prodTypeId=12169&objectID=c03090774

 

Ivo

3 REPLIES 3
oikjn
Honored Contributor

Re: Check uptime P4300

Not that I have an answer for the direct question, but if you think you are getting close to 6 month of up-time on a VSA, why not simply reboot it during a period of lost activity? Unless you are using raid0 LUNs, this should have minimal impact on your production if don't during a period of low SAN activity.

I'm running VSA VMs on my production HV servers so I have to reboot them pretty frequently and its never really much of an issue.
bryan_hadzik
Frequent Advisor

Re: Check uptime P4300

Go to the diagnostic section of one node, then the hardware information tab. Click refresh. Uptime in hours in under the Stat section.

Emilo
Trusted Contributor

Re: Check uptime P4300

Why dont you just install the patch?

20031 or upgrade to 9.5?