HPE Community
StoreVirtual Storage
1751902 Members
4844 Online
108783 Solutions
New Discussion

Configure ILO-2 interface on HP P4500 G2 SAN array

 
RockyH
New Member

‎03-01-2015 05:34 PM

‎03-01-2015 05:34 PM

Configure ILO-2 interface on HP P4500 G2 SAN array

Guys,

 

I am struggling to find ANY documentation on how to do this.

Would ANY of you have a link or two on documentation?

I would be grateful.

 

Thanks in advance.

 

RH

0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎03-02-2015 09:45 AM

‎03-02-2015 09:45 AM

Re: Configure ILO-2 interface on HP P4500 G2 SAN array

AFAIR the P4500 G2 is a DL180 G6 with an LO-100, not an ILO.

 

You can configure it from BIOS - advanced - IPMI


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.