StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Failed VSA 8.1 to 8.5 Upgrade?

SOLVED
Go to solution
walterrsmith
Occasional Advisor

Failed VSA 8.1 to 8.5 Upgrade?

Tried to perform an upgrade to an existing VSA 8.1 instance today after downloading the SANiQ_8.5.00.0319_20100326_all.upgrade bits. It goes along well until it comes up with an error as follows:

Extracting package contents ...
Starting software upgrade ...
Current Software Version: 8.1.00.0047
New Software Version: 8.5.00.0319
Checking storage node ...
Preparing for upgrade ...
Checking if there is space for the new software ...
***********************************************
**ERROR**: The OS disk in this node is not large enough for the new software upgrade package.
* You must increase the size of the OS disk before upgrading this node.
* See the Release 8.5 P4000 SAN Solution Upgrade Guide for instructions.

***********************************************
OK then ... how do you upgrade an inplace VSA (that has VMDK's on it!)? By the way, I can't find any "Upgrade Guide" in the documentation on the FTP site.

Thanks to all.
2 REPLIES
Paul Miano
Occasional Advisor
Solution

Re: Failed VSA 8.1 to 8.5 Upgrade?

You may want to check the upgrade instructions at: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02073063/c02073063.pdf

There is a section about enlarging the OS size for VSA due to the increase in the VMTools size.

Good luck,

Paul
walterrsmith
Occasional Advisor

Re: Failed VSA 8.1 to 8.5 Upgrade?

Nice call!

That was the ticket. Don't know why I couldn't find the "Upgrade Guide".

Thanks again.