HP SAN 4730 Storevirtual Node error message when trying to update (last of 4 nodes)

[jtslade]

HP SAN 4730 Storevirtual trying to get it upgraded to 11.5 (later 12.6)

all nodes were on 10.5. Used an HPE provided ISO to get all the patches for each node updated to meet all of the 10.5. One node at a time.

My 4th node will not upgrade to HP SAN/iQ OS 11.5 no matter what.

The CMC will give out this error at the 25% mark:

Installation failed. An error was encountered with the configuration, RAID, or parts. (Exit Status 151).

===========================================

[jtslade]

Tail of the upgrade log, only place it notes any errors:

etc/lefthand/hwid.conf
etc/configs/.serialnumber
Update /mnt/upgraded/etc/passwd with entries in /etc/passwd
Update /mnt/upgraded/etc/shadow with entries in /etc/shadow
Update /mnt/upgraded/etc/group with entries in /etc/group
INFO: hostname SAN02 is NOT associated with 127.0.0.1 in /mnt/upgraded/etc/hosts, adding it now
Traceback (most recent call last):
  File "/etc/lefthand/brand/common/bin/create-ldap-cfg-tar.py", line 20, in ?
    from lhn import lockfile
EOFError: EOF read where object expected
INFO: created Active Directory config in /root/ldap-cfg.tar.bz2, SHA1 = []
ERROR: Failed to preserve Active Directory configuration.
       /root/ldap-cfg.tar.bz2 is missing from current SAN/iQ version
umount: /mnt/upgraded/proc: not mounted
umount: /mnt/upgraded/dev: not mounted
umount: /mnt/upgraded: device is busy
umount: /mnt/upgraded: device is busy
#------------------------------------------------------------------------------#
MESG: Aborting due to an error encountered during installation of the software upgrade.
MESG: Contact Customer Support to resolve the issue.
MESG: Installation aborted.
INFO: Date: Wed Nov  1 16:54:29 GMT 2017
Reset filedescriptors
INFO: Copying log file to permanent location (/mnt/lhnupgrade/upgrade_from_10.5.00.0149_to_11.5.00.0673_20171101.log -> /var/log/upgrade_from_10.5.00.0149_to_11.5.00.0673_20171101.log) ...

[jtslade]

Top of upgrade log:

INFO: ServerEngines Corp. Emulex OneConnect 10Gb NIC installed
     10Gb NIC firmware version = [5719-v1.46]
WARNING: Cannot determine Emulex 10Gb firmware fields:
major=[5719-v1] minor=[46] patch=[] build=[]
/usr/sbin/hpacucli
response:ok:
response:ok:
INFO: f_checkMinimumFirmwareSmartArray: SmartArray P410 controller not detected in this platform, nothing to do.
response:ok:started
response:ok:started
INFO: Starting software upgrade (version 11.5.00.0673) ...
INFO: System: SAN02

INFO: Date: Wed Nov  1 16:53:07 GMT 2017
INFO: Action: installing software upgrade, version 11.5.00.0673
INFO: ##### Upgrade Mode: [reboot_required] #####
INFO: New Version Information:
INFO:     New SANiQ Version: 11.5.00.0673
INFO:     root OS directory tree will be extracted directly from gzipped tarball
INFO:     New Data Directory=/mnt/lhnupgrade/data/default
INFO: Current Version Information:
INFO:     Current SANiQ Version: 10.5.00.0149
INFO:     Current Kernel: Linux 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011
INFO:     Current OS: GNU/Linux
INFO:     Current Machine: x86_64
INFO:     Current Processor: x86_64
INFO:     Current Data Directory=/mnt/lhnupgrade/data/default
INFO: Supported Releases:
INFO:     Oldest Supported SANiQ Version: 9.5.00
INFO: Build Details:
INFO:     Target: 64
INFO:     Build Timestamp: Sun, Jul 27 2014 19:01:25 MDT
INFO: Platform Details:
INFO:     Platform: HPDLG8B
INFO:     Current Brand Directory: /etc/lefthand/brand/HPDLG8B/
INFO:     New Brand Directory:     /etc/lefthand/brand/HPDLG8B/
INFO:     Current HWID_CONFIG:     HPDLG8B
INFO:     New HWID_CONFIG:         HPDLG8B
INFO:     Model Number:            36
INFO: The current root OS, /, is mounted on /dev/cciss/c0d0p2
INFO:     Partition that / is currently mounted to: root_os_device = [/dev/cciss/c0d0p2]
INFO:     Size of root/OS partition (in bytes):                 [5121245184]
INFO:     Size of disk containing root/OS partition (in bytes): [34355036160]
#---------------------------------------------------------------#
INFO: Currently installed patches:
total 30
-rw-r--r-- 1 root root  594 Sep 12  2013 10054-07.xml
-rw-r--r-- 1 root root  677 Oct 25 17:58 10139-00.xml
-rw-r--r-- 1 root root 1059 Sep 12  2013 10142-00.xml
-rw-r--r-- 1 root root  705 Oct 31 18:37 10147-00.xml
-rw-r--r-- 1 root root  689 Oct 24 18:28 10152-00.xml
-rw-r--r-- 1 root root  781 Aug 10 05:03 10161-00.xml
-rw-r--r-- 1 root root 1100 Oct 25 15:44 10172-00.xml
-rw-r--r-- 1 root root 1048 Oct 28 00:25 10186-00.xml
-rw-r--r-- 1 root root 1376 Oct 25 19:39 35010-00.xml
-rw-r--r-- 1 root root 1178 Oct 25 19:54 35011-00.xml
-rw-r--r-- 1 root root  850 Oct 25 19:59 35012-00.xml
-rw-r--r-- 1 root root 1057 Oct 25 20:04 35014-00.xml
-rw-r--r-- 1 root root  961 Oct 25 20:10 35019-00.xml
-rw-r--r-- 1 root root 1181 Oct 25 20:17 35020-00.xml
-rw-r--r-- 1 root root  905 Oct 25 20:27 35022-00.xml
-rw-r--r-- 1 root root  915 Oct 25 20:36 35024-00.xml
-rw-r--r-- 1 root root 1154 Aug 10 06:06 35025-00.xml
-rw-r--r-- 1 root root 1461 Oct 25 20:46 35027-00.xml
-rw-r--r-- 1 root root 1023 Aug 10 06:29 35028-00.xml
-rw-r--r-- 1 root root 1373 Oct 25 21:19 35030-00.xml
#------------------------------------------------------------------------------#
INFO: Filesystems mounted right now:
rootfs / rootfs rw 0 0
/dev/root / ext3 rw,data=ordered 0 0
/dev /dev tmpfs rw 0 0
/proc /proc proc rw 0 0
/sys /sys sysfs rw 0 0
none /selinux selinuxfs rw 0 0
/proc/bus/usb /proc/bus/usb usbfs rw 0 0
devpts /dev/pts devpts rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
tmpfs /tmp tmpfs rw 0 0
/dev/cciss/c0d0p5 /var/log ext3 rw,data=ordered 0 0
none /proc/sys/fs/binfmt_misc binfmt_misc rw 0 0
sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw 0 0
/dev/cciss/c0d0p7 /etc/lefthand/data ext3 rw,noatime,nodiratime,data=ordered 0 0
/dev/cciss/c0d0p6 /mnt/lhnupgrade ext3 rw,data=ordered 0 0
#------------------------------------------------------------------------------#
MESG: Starting software upgrade ...
MESG: Current Software Version: 10.5.00.0149
MESG: New Software Version: 11.5.00.0673
#------------------------------------------------------------------------------#
MESG: Checking storage node ...
INFO: The current root OS, /, is mounted on /dev/cciss/c0d0p2
Checking package contents ...
INFO: The flash image was not checked, using root/OS directory extraction.
#------------------------------------------------------------------------------#
Checking storage node configuration ...
INFO: Checking version information ...
INFO: Checking current version is a supported release ...
#------------------------------------------------------------------------------#
INFO: Memory check required for current platform and SAN/iQ version
INFO: Memory(in KB) on current NSM: 65837508.
#------------------------------------------------------------------------------#
INFO: Checking to see if the OS archiver needs to be halted ...
INFO: OS archiver successfully halted.
#------------------------------------------------------------------------------#
INFO: Looking for hardware reports ...
#---------------------------------------------------------------#
INFO: hydra get:/lhn/public/system/info/report/raidSetup/

HAL Diagnostics (version 4.0)

Platform: 4730  Build: 10.5.00.0149.0  ID: D8:9D:67:29:46:94  F/W: 3.30

[jtslade]

Installation process started on: 11/1/17 1:35 PM

Performance Instrumentation -- Upgrade:  --MG Configuration, ID: GETSAN --

Performance Instrumentation -- Upgrade:  --NSM Configuration--

Performance Instrumentation -- Upgrade:  Number of NSMs:  1

Performance Instrumentation -- Upgrade:  NSM Model Name: 4730

Performance Instrumentation -- Upgrade:  NSM Software Version: 10.5.00.0149.0

Performance Instrumentation -- Upgrade:  NSM Host Name: SAN02

Performance Instrumentation -- Upgrade:  NSM IP Address:

Performance Instrumentation -- Upgrade:  NSM Serial Number: D8:9D:67:29:46:94

Performance Instrumentation -- Upgrade:  --End Of NSM Configuration--

Performance Instrumentation -- Upgrade:  Regular Manager Count: 3

Performance Instrumentation -- Upgrade:  Manager's Status: 4 managers configured: 3 regular managers, 1 Failover Manager

Performance Instrumentation -- Upgrade:  systemIdDataModel Version: 8

Performance Instrumentation -- Upgrade:  Has Failover Manager: true

Performance Instrumentation -- Upgrade:  Has Virtual Manager: false

Performance Instrumentation -- Upgrade:  Global Database Version: 168099840

Performance Instrumentation -- Upgrade:  Number Admin Groups: 2

Performance Instrumentation -- Upgrade:  Number Admin Users: 7

Performance Instrumentation -- Upgrade:  Number Admin Users: 7

Performance Instrumentation -- Upgrade:  Global Internal Version: 20121120

Performance Instrumentation -- Upgrade:  Number of Clusters: 1

Performance Instrumentation -- Upgrade:  Number of Managers: 4

Performance Instrumentation -- Upgrade:  Number of Schedules: 0

Performance Instrumentation -- Upgrade:  Number of Scratch Volumes: 0

Performance Instrumentation -- Upgrade:  Number of Sites: 2

Performance Instrumentation -- Upgrade:  Number of Stores: 4

Performance Instrumentation -- Upgrade:  --End Of MG Configuration--

/192.168.57.202:11120: connectToServer received a Status message from the install server running on the node It was: 'OK', and the error flag was: false

/192.168.57.202:11120: sendPackageToServer received a Status message from the install server running on the node It was: 'OK', and the error flag was: false

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Extracting the install file ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Extracting package contents ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : MESG: Configuring platform specific settings ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Configuring platform specific settings ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : HWID: 36

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : HWID Model: 4730

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : HWID Config: HPDLG8B

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Brand Directory: /etc/lefthand/brand/HPDLG8B/

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : platform configuration: '/mnt/lhnupgrade/platforms/HPDLG8B.sh' ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Starting software upgrade ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Current Software Version: 10.5.00.0149

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : New Software Version: 11.5.00.0673

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Checking storage node ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : begin MAIN install_saniq.sh: Preparing for upgrade ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Installing new software ...

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Aborting due to an error encountered during installation of the software upgrade.

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Contact Customer Support to resolve the issue.

/192.168.57.202:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Installation aborted.

/192.168.57.202:11120: Received an UpgradeServerStatus message from the install server running on the node It was : INSTALL_STATUS_MESSAGE: done [151]

[Assen]

Hi jtslade,

could you please share the hardware info (CMC>Diagnostic>Hardware Information) from the 4th node, that does not want to update?

What is your localization setting of the CMC? (CMC>Preferences>Locale)

BR

Assen

[jtslade]

Assen Thank you for checking this out.

 localization setting of the CMC? (CMC>Preferences>Locale):

Current System Locale: English (United States)
Current CMC Locale:  [Use System Setting]

HARDWARE INFORMATION

*Hardware Information*

    

*Hostname*

    SAN02

*Model*

    4730

*Storage System Software*

    Version 10.5.00.0149.0
    Software Patches     10054-07, 10139-00, 10142-00, 10147-00, 10152-00,
10161-00, 10172-00, 10186-00, 35010-00, 35011-00, 35012-00, 35014-00,
35019-00, 35020-00, 35022-00, 35024-00, 35025-00, 35027-00, 35028-00,
35030-00

*IP Address*

    

*Support Key*

    

**

    

*Warranty Information*

    
  Product Part Number     B7E28A
  Product Serial Number     
  Entitlement Order Number     

**

    

*NIC Data*

    
  Card     1
    Description     Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
PCIe
    Mac Address     
    Address     0.0.0.0
    Mask     0.0.0.0
    Gateway     0.0.0.0
    Mode     disabled
    Firmware Version     5719-v1.46 NCSI v1.3.16.0
    Driver Name     tg3
    Driver Version     3.122g
  Card     2
    Description     Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
PCIe
    Mac Address     
    Address     0.0.0.0
    Mask     0.0.0.0
    Gateway     0.0.0.0
    Mode     disabled
    Firmware Version     5719-v1.46 NCSI v1.3.16.0
    Driver Name     tg3
    Driver Version     3.122g
  Card     3
    Description     Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
PCIe
    Mac Address     
    Address     0.0.0.0
    Mask     0.0.0.0
    Gateway     0.0.0.0
    Mode     disabled
    Firmware Version     5719-v1.46 NCSI v1.3.16.0
    Driver Name     tg3
    Driver Version     3.122g
  Card     4
    Description     Broadcom Corporation NetXtreme BCM5719 Gigabit Ethernet
PCIe
    Mac Address     
    Address     0.0.0.0
    Mask     0.0.0.0
    Gateway     0.0.0.0
    Mode     disabled
    Firmware Version     5719-v1.46 NCSI v1.3.16.0
    Driver Name     tg3
    Driver Version     3.122g
  Card     5
    Description     Logical Failover Device ( balance-alb )
    Mac Address     
    Address     
    Mask     255.255.255.0
    Gateway     0.0.0.0
    Mode     static
    Firmware Version     2
    Driver Name     bonding
    Driver Version     3.4.0-1
  Card     6
    Description     Emulex Corporation OneConnect 10Gb NIC (be3)
    Mac Address     
    Address     
    Mask     255.255.255.0
    Gateway     0.0.0.0
    Mode     slave
    Firmware Version     10.2.477.10
    Driver Name     be2net
    Driver Version     10.2.477.6
  Card     7
    Description     Emulex Corporation OneConnect 10Gb NIC (be3)
    Mac Address     
    Address     
    Mask     255.255.255.0
    Gateway     0.0.0.0
    Mode     slave
    Firmware Version     10.2.477.10
    Driver Name     be2net
    Driver Version     10.2.477.6

**

    

*Memory*

    
  Total     62.79 GB
  Free     56.05 GB

**

    

*CPU*

    
  Number 1     
  Model Name     Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
  Speed     1995.258
  Cache Size     15360 KB

**

    

*Stat*

    
  CPU (seconds)     user (871) sys (468) idle (34158) I/O (1383) IRQ (209)
  Machine Uptime (hours)     up-time (0.86) idle (0.84)

**

    

*Backplane Information*

    
  Backplane Status     Normal
  Firmware Version     3.30
  Serial Number     
  LED Support     
    idLed     off

**

    

*Motherboard Information*

    
  Chassis Part Number     B7E28A
  Chassis Serial Number     
  BIOS Version     P70, 07/01/2015
  IPMI Information     
    Firmware Revision     2.50
    IPMI Version     2.0

**

    

*Drive Info*

    

*Model*

    

*Serial#*

    

*Capacity*

    

*F/W Version*

  Drive 1     
HP EG0900FBVFQ    KPJZDBAF    838.28 GB    HPDE

  Drive 2     
HP EG0900FBVFQ    KPJZZNDF    838.28 GB    HPDE

  Drive 3     
HP EG0900FCSPN    83H0A0AMFTM11333    838.28 GB    HPD0

  Drive 4     
HP EG0900FBVFQ    KPJZYDKF    838.28 GB    HPDE

  Drive 5     
HP EG0900FBVFQ    W8G8JS5X    838.28 GB    HPDE

  Drive 6     
HP EG0900FBVFQ    KPJZZUJF    838.28 GB    HPDE

  Drive 7     
HP EG0900FBVFQ    KPJY6AHF    838.28 GB    HPDE

  Drive 8     
HP EG0900FBVFQ    KPJZY9XF    838.28 GB    HPDE

  Drive 9     
HP EG0900FBVFQ    KPJXHSYF    838.28 GB    HPDE

  Drive 10     
HP EG0900FBVFQ    KPK0604F    838.28 GB    HPDE

  Drive 11     
HP EG0900FBVFQ    KPJZZRDF    838.28 GB    HPDE

  Drive 12     
HP EG0900FBVFQ    KPK06H6F    838.28 GB    HPDE

  Drive 13     
HP EG0900FBVFQ    KPK065JF    838.28 GB    HPDE

  Drive 14     
HP EG0900FBVFQ    KPJZZNZF    838.28 GB    HPDE

  Drive 15     
HP EG0900FBVFQ    KPJZZHSF    838.28 GB    HPDE

  Drive 16     
HP EG0900FBVFQ    KPJZYG3F    838.28 GB    HPDE

  Drive 17     
HP EG0900FBVFQ    KPK066NF    838.28 GB    HPDE

  Drive 18     
HP EG0900FBVFQ    KPJZYMYF    838.28 GB    HPDE

  Drive 19     
HP EG0900FBVFQ    KPJZYE6F    838.28 GB    HPDE

  Drive 20     
HP EG0900FBVFQ    KPJZYEMF    838.28 GB    HPDE

  Drive 21     
HP EG0900FBVFQ    KPJZY7XF    838.28 GB    HPDE

  Drive 22     
HP EG0900FBVFQ    KPJZYE9F    838.28 GB    HPDE

  Drive 23     
HP EG0900FBVFQ    KPJZYJ3F    838.28 GB    HPDE

  Drive 24     
HP EG0900FBVFQ    KPJZYADF    838.28 GB    HPDE

  Drive 25     
HP EG0900FBVFQ    W8H3LZLG    838.28 GB    HPDE

**

    

*Drive Status*

    

*Status*

    

*Health*

    

*Temperature*

  Drive 1     
Active    Normal    44

  Drive 2     
Active    Normal    45

  Drive 3     
Active    Normal    47

  Drive 4     
Active    Normal    44

  Drive 5     
Active    Normal    44

  Drive 6     
Active    Normal    43

  Drive 7     
Active    Normal    42

  Drive 8     
Active    Normal    40

  Drive 9     
Active    Normal    40

  Drive 10     
Active    Normal    40

  Drive 11     
Active    Normal    39

  Drive 12     
Active    Normal    39

  Drive 13     
Active    Normal    38

  Drive 14     
Active    Normal    38

  Drive 15     
Active    Normal    39

  Drive 16     
Active    Normal    38

  Drive 17     
Active    Normal    38

  Drive 18     
Active    Normal    37

  Drive 19     
Active    Normal    38

  Drive 20     
Active    Normal    39

  Drive 21     
Active    Normal    37

  Drive 22     
Active    Normal    37

  Drive 23     
Active    Normal    37

  Drive 24     
Active    Normal    37

  Drive 25     
Hot spare    Normal    37

**

    

*RAID*

    Normal
  Rebuild Rate     Medium
  Unused Devices     Disk Drive 25 Hot spare
  Statistics     2 Arrays
  Array 1     /dev/cciss/c0d1p2 : DATA Partition Raid 6 8351.32 GB Normal
  Array 2     /dev/cciss/c0d2p2 : DATA Partition Raid 6 8383.31 GB Normal

**

    

*RAID OS Partitions*

    Normal
  Statistics     2 Arrays
  Array 1     /dev/cciss/c0d0p5 : LOG Partition Raid 6 977.00 MB Normal
  Array 2     /dev/cciss/c0d0p7 : SANIQ Partition Raid 6 2930.00 MB Normal

**

    

*Controller/Cache Items*

    
  Card 1     
    Model     Smart Array P420i
    Serial Number     
    Hardware Version     B
    Firmware Version     8.00
    Driver Version     3.6.28-RH2
    Cache Status     Normal
    Backup Power Status     Normal
    Backup Power Type     Capacitors
    Cache Enabled Status     Normal
    Cache Ratio     50% Read / 50% Write
    Cache Size     2048MB
    Backup Power Voltage     Info not available for this hardware platform

**

    

*Power Supply*

    Dual

*Power Supplies*

    
  Number 1     Normal
  Number 2     Normal

**

    

*Fans*

    

*Status*

    

*RPM*

    

*Min*

    

**

  Fan3     
Normal    ---    ---    

  Fan4     
Normal    ---    ---    

  Fan5     
Normal    ---    ---    

  Fan6     
Normal    ---    ---    

**

    

*Temperatures*

    

*Status*

    

*Celsius*

    

*Warning*

    

*Critical*

  CPU (1)     
Normal    0    66    68

  Ambient     
Normal    29    46    48

  System Board     
Normal    47    56    58

[Assen]

yaw Jtslade

All looks good from firmware versions, as it should be. Localization also ok.

Do you have some kind of virus scanner running on the machine where the CMC is? I know it's strange that all other nodes

updated without issues, but could you disable virus scan and try again.

As of description and log it behaves like the image is corrupt or got corrupted during transfer to node. Have seen virus scan corrupt install packages quite often.

BR

Assen

[jtslade]

Yes the 3 other nodes upgraded via support mode one at a time.

I did however make a new Win2k12 VM with no AV (or anything installed) other than the 12.6 CMC

This was installed on a completely seperate esxi server on local storage not on the SAN cluster that was being upgraded.

and I get the exact same error message:

in upgrade logs: MESG: Aborting due to an error encountered during installation of the software upgrade.
MESG: Contact Customer Support to resolve the issue.
MESG: Installation aborted.

From the CMC: Installation failed. An error was encountered with the configuration, RAID, or parts. (Exit Status 151)

Where can we look up the actual error in the logs instead of this generic one.

What is exit status 151?

Thank you,

[peyrache]

Extract support bundle from CMC and look on update logs
(patchXXX.logs)
JY

[jtslade]

Ok so when comparing this log from the fail 2 upgrade to 11.5 node with one of the others that did upgrade. This is the only difference.

INFO: hostname SAN02 is NOT associated with 127.0.0.1 in /mnt/upgraded/etc/hosts, adding it now
Traceback (most recent call last):
  File "/etc/lefthand/brand/common/bin/create-ldap-cfg-tar.py", line 20, in ?
    from lhn import lockfile
EOFError: EOF read where object expected
INFO: created Active Directory config in /root/ldap-cfg.tar.bz2, SHA1 = []
ERROR: Failed to preserve Active Directory configuration.
       /root/ldap-cfg.tar.bz2 is missing from current SAN/iQ version
umount: /mnt/upgraded/proc: not mounted
umount: /mnt/upgraded/dev: not mounted
umount: /mnt/upgraded: device is busy
umount: /mnt/upgraded: device is busy
#------------------------------------------------------------------------------#
MESG: Aborting due to an error encountered during installation of the software upgrade.
MESG: Contact Customer Support to resolve the issue.
MESG: Installation aborted.
INFO: Date: Wed Nov  1 16:54:29 GMT 2017
Reset filedescriptors
INFO: Copying log file to permanent location (/mnt/lhnupgrade/upgrade_from_10.5.00.0149_to_11.5.00.0673_20171101.log -> /var/log/upgrade_from_10.5.00.0149_to_11.5.00.0673_20171101.log) ..

Compare that to a successful SAN node upgade to 11.5 log file:

INFO: hostname SANF02 is NOT associated with 127.0.0.1 in /mnt/upgraded/etc/hosts, adding it now
INFO: created Active Directory config in /root/ldap-cfg.tar.bz2, SHA1 = [4ddf0cbcf382815b241b07290a885d3db78f2e2c]
etc/ldap.conf
etc/openldap/ldap.conf
root/.ldaprc
root/.ldaprc-pw
etc/lefthand/bin/.ssh/authorized_keys
etc/lefthand/nsm.cert
etc/lefthand/nsm.key
INFO: Active Directory config has been installed into new SAN/iQ version, files preserved are:
[etc/ldap.conf
etc/openldap/ldap.conf
root/.ldaprc
root/.ldaprc-pw
etc/lefthand/bin/.ssh/authorized_keys
etc/lefthand/nsm.cert
etc/lefthand/nsm.key]
#------------------------------------------------------------------------------#
#------------------------------------------------------------------------------#
INFO: Verifying restored configuration ...
INFO:     skipping directory/link "/etc/configs/monitor/"
INFO:     verifying "/etc/configs/monitor/Monitor.cfg"
INFO:     verifying "/etc/configs/monitor/PlatformMonVars.cfg"
INFO:     verifying "/etc/configs/monitor/PresetTriggers.cfg"
INFO:     verifying "/etc/configs/monitor/SensorProfile.cfg"
INFO:     verifying "/etc/configs/monitor/VariableDefinitions.cfg"
INFO:     verifying "/etc/group"
1c1,2
< root:x:0:root