StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

HPE Storevirtual P4530 Upgrade fails

HughesPhil
Occasional Visitor

HPE Storevirtual P4530 Upgrade fails

trying to upgrade my system through CMC,  have managed to update the CMC to 12.7 with direct download.  When upgrading download via HTTPS starts and downloads anything from 10mb to 300mb but the fails with https error.  Tried going directly to the url specified in preferences but get a 403 error.  can anyone advise if we can manually download the upgrades (previously could do via ftp).  tried various times and every day for two week..

"Error occurred trying to connect to the https server ...."

test the https connection and always suceeds, start download again and will fail .

No proxy connect in use

3 REPLIES
BC2
Occasional Visitor

Re: HPE Storevirtual P4530 Upgrade fails

Good to see I'm not the only one.

It might have something to do with their certificates.  Although the 403 is normal when browsing from the web, it seems they might have forgotten to update the certs.

https://www.hpe.com - uses Symantec (SHA256)
https://downloads.hpe.com - uses DigiCert (SHA2)

Although not recommended, you can change to http downloads.
Please read up and ensure you understand the risks associated with downloading without using https.

In the file "C:\Program Files (x86)\HPE\StoreVirtual\UI\downloads\upgrades.xml" any URL https://downloads.hpe.com/pub/StoreVirtual/CMC/ to http://downloads.hpe.com/pub/StoreVirtual/CMC/

Frantisek Papousek
Frequent Visitor

Re: HPE Storevirtual P4530 Upgrade fails

Thank you very much

The same problem after upgrade to 12.7.

Your solution works seamlessly.

P.S. Now i need to find solution for

Event: EID_IP_ERRORS_EXCESSIVE E010A0401 Cluster: 'Excessive' packet loss. :-)

 

 

Admin85858
Occasional Advisor

Re: HPE Storevirtual P4530 Upgrade fails

Event: EID_IP_ERRORS_EXCESSIVE E010A0401 Cluster: 'Excessive' packet loss. :-)

Haven't found a solution for that. In my opinion it could correlate with Flow Control settings......

It is only appearing when I'm running my backup at night!

Someone has a solution please tell me ;-)