HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Help../ Someone has a options to update San/iQ from 9.0 to 9.5, for 6 HP p4800

 
Armand_MX
Occasional Contributor

Help../ Someone has a options to update San/iQ from 9.0 to 9.5, for 6 HP p4800

Hi everyone.
Someone, has a table of times about update a HP p4800 solution, because we need to update one solution to 6 p4800 nodes.

and we thought to update this components:

CMC to 9.0 TO 9.5
SAN/IQ 9.0 TO 9.5

Firmware: virtual connect from 3.51 to 3.70
Onboard Administrator from 3.32 to last version.
ilo to last version.


Someone has a some component more to update and times for this process

tks

Armando Medina
Field Service Engineer
HP Enterprise Business Mexico
armando.medina@hp.com
APS; BladeSystem & StoreSure & StoreEver
1 REPLY
oikjn
Honored Contributor

Re: Help../ Someone has a options to update San/iQ from 9.0 to 9.5, for 6 HP p4800

depends on the change rate of your system since there is always a resync after each node upgrade.  As long as you keep the activity low each resync will be minimal.  For us, it took about 5 minutes per node, but your case may be different. 

 

Just make a good backup before the upgrade and if you want turn off as many optional systems as you can before upgrading, but the upgrade process is done online so technically there is no downtime on the system.  I"ve done plenty on live production hours without an issue.