HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

How to get via snmp the Read Hard Errors from (since reset)

 
akarydas2
Occasional Visitor

How to get via snmp the Read Hard Errors from (since reset)

We were using the OID: .1.3.6.1.4.1.232.3.2.5.1.1.16 to get the Read Hard Errors from our storage nodes P4530 but it seems that this OID get only the value from the "since Factory" and not from "since reset" values of the ADU report.

Smart Array P420i in Embedded Slot : Internal Drive Cage at Port 1I : Box 1 : Drive Cage on Port 1I : Physical Drive (2 TB SAS) 1I:1:9 : Monitor and Performance Statistics (Since Factory)


   Read Errors Hard                     0x00000048
 

Smart Array P420i in Embedded Slot : Internal Drive Cage at Port 1I : Box 1 : Drive Cage on Port 1I : Physical Drive (2 TB SAS) 1I:1:9 : Monitor and Performance Statistics (Since Reset)

 
   Read Errors Hard                     0x00000000

Is there any way to get the actual Read Hard Errors of the drive from "since reset" so we can have the actual picture of its status?

 

Thanks

 

1 REPLY
Stor_Mort
HPE Pro

Re: How to get via snmp the Read Hard Errors from (since reset)

Hi akarydas2, 

'Errors since reset' indicate the number accumulated since the last reboot. This could easily be zero. Disk drives often record errors on sectors which were written early in life and are rarely read later on. Why do you think this is incorrect?

I am an HPE employee - HPE StoreVirtual Support