StoreVirtual Storage
Showing results for 
Search instead for 
Did you mean: 

Issues imaging P4300

Occasional Visitor

Issues imaging P4300

Hello everyone!


We have a pair of P4300 G2s that we would like to perform a sysem recovery on. We are using the HP P400 Storage SYstem Quick Restore ISO and the System Recovery Procedures guide ( to do this.

The first SAN went without issue, however we are having difficulties with the second.


After booting from the System Recovery ISO and passing the prompt for licence key via USB pendrive, we are greeted by a lengthy list of CLI output, as per the attached picture.


I have run a few passes with of the Insight Diagnostics via the SmartStart software which shows everything is working fine.


Any ideas as to what could be the problem or what we are doing wrong?



P.S. This thread has been moved Storage Area Networks (SAN) (Enterprise) to HP StoreVirtual Storage / LeftHand. - HP Forum Moderator