HPE Community
StoreVirtual Storage
1752788 Members
6150 Online
108789 Solutions
New Discussion

Issues imaging P4300

 
WhiteChalk
Frequent Visitor

‎02-18-2014 02:33 PM - last edited on ‎02-19-2014 06:59 PM by

‎02-18-2014 02:33 PM - last edited on ‎02-19-2014 06:59 PM by

Issues imaging P4300

Hello everyone!

 

We have a pair of P4300 G2s that we would like to perform a sysem recovery on. We are using the HP P400 Storage SYstem Quick Restore ISO and the System Recovery Procedures guide (http://h10032.www1.hp.com/ctg/Manual/c01744796.pdf) to do this.


The first SAN went without issue, however we are having difficulties with the second.

 

After booting from the System Recovery ISO and passing the prompt for licence key via USB pendrive, we are greeted by a lengthy list of CLI output, as per the attached picture.

 

I have run a few passes with of the Insight Diagnostics via the SmartStart software which shows everything is working fine.

 

Any ideas as to what could be the problem or what we are doing wrong?

 

 

P.S. This thread has been moved Storage Area Networks (SAN) (Enterprise) to HP StoreVirtual Storage / LeftHand. - HP Forum Moderator

 

 

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.