HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
StoreVirtual Storage
Showing results for 
Search instead for 
Did you mean: 

P4300 G2 CPU Error


P4300 G2 CPU Error

I received the following error from my P4300.  Does this mean I need to replace the CPU?  or could it be something else like a faulty sensor?  The resolution is a missing page.


CPU0 Diode = 'Faulty'. CRITICAL (E01070101)


Here is more info:


Event                   :       E01070101 EID_TEMPERATURE_FAULTY

Severity                :       Critical

Component               :       HW

Object Type             :       Temperature

Object Name             :       CPU0 Diode

Management Group        :       ExchangeSAN

Cluster                 :       Exchange

IP/Hostname             :       

Date and Time           :       02/12/2013 17:09:26 GMT

User                    :       System

Resolution              :       http://h20000.www2.hp.com/bizsupport/site/search/r4_0/jsp/search.jsp?lang=en&cc=US&pc=0&sc=2&cf=1&cm=1&cs=1&c130=1&c115=1&c110=1&c120=1&nh=10&rf=0&lkc=1&lk=1&tx=E01070101

Message                 :       The 'CPU0 Diode' status is 'Faulty'.  The temperature (79C) has exceeded the limit.

Esteemed Contributor

Re: P4300 G2 CPU Error

It does look like a HW failure. You should contact HP support to report this failure.


ADMIN: Please move this thread to StoreVirtual/LeftHand category.


If this post was useful , click the Kudos Star on the left side to say Thanks!