HPE Community
StoreVirtual Storage
1753448 Members
5973 Online
108794 Solutions
New Discussion

P4300 G2 iSCSI VLAN Route to configure NTP server

 
chrishorvat
New Member

‎01-28-2013 12:02 PM - last edited on ‎01-30-2013 06:33 PM by

‎01-28-2013 12:02 PM - last edited on ‎01-30-2013 06:33 PM by

P4300 G2 iSCSI VLAN Route to configure NTP server

I need some help configuring my P4300 G2 SAN to configure routes from the iSCSI vlan (VLAN 20 192.168.20.xxx/24) to our Transport VLAN (1 172.16.1.xxx/24) to allow NTP communications only from the SAN to the NTP GPS clocks (172.16.1.3 and 172.16.1.4)

 

We are running the iSCSI VLAN on a ProCurve 2910al switch(s) with port 2-24 untagged to VLAN 20 (iSCSI) and port 1 untagged VLAN 1 (Transport). These switches eventually connection to a Firewall with the VLANS of (1,3,10,50, and 60) as I did not want iSCSI traffic being able to route up to the firewall. 

 

How can I configure the P4300 and the 2910al(s) to route NTP traffic up only?

 

Best regards,

 

 

P.S. this thread has been moved from Storage > General to HP StoreVirtual / HP LeftHand Storage - HP Forums moderator

0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.