Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

P4300 G2 iSCSI VLAN Route to configure NTP server

chrishorvat
Occasional Visitor

P4300 G2 iSCSI VLAN Route to configure NTP server

I need some help configuring my P4300 G2 SAN to configure routes from the iSCSI vlan (VLAN 20 192.168.20.xxx/24) to our Transport VLAN (1 172.16.1.xxx/24) to allow NTP communications only from the SAN to the NTP GPS clocks (172.16.1.3 and 172.16.1.4)

 

We are running the iSCSI VLAN on a ProCurve 2910al switch(s) with port 2-24 untagged to VLAN 20 (iSCSI) and port 1 untagged VLAN 1 (Transport). These switches eventually connection to a Firewall with the VLANS of (1,3,10,50, and 60) as I did not want iSCSI traffic being able to route up to the firewall. 

 

How can I configure the P4300 and the 2910al(s) to route NTP traffic up only?

 

Best regards,

 

 

P.S. this thread has been moved from Storage > General to HP StoreVirtual / HP LeftHand Storage - HP Forums moderator