StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

P4300 G2 shutdown suddenly..

SOLVED
Go to solution

P4300 G2 shutdown suddenly..

Dear Expert..

I've HP StorageWorks P4300 G2 7.2TB SAS Starter SAN (BK716A), consist 2 Node of P4300.

One node always goes shutdown suddenly, When powering up the system, approximately 5 minutes later the system goes shutdwon suddenly. There is no any led error on led indicator in front of the system..

The other node is running well. I've already used CD Quick restore for reimaging SAN I/Q and successfull but it doesn't solve the problem.

I've also tried plug-unplug fans, power supplies & swap its with good one from the other node but still it's doesn't solve the problem..

Need ur help..

Regards,
Piyadassi
4 REPLIES
Uwe Zessin
Honored Contributor
Solution

Re: P4300 G2 shutdown suddenly..

Maybe it is a problem similar to this:

c01959960 - ADVISORY: HP LeftHand P4000 power ambient temperature thresholds are incorrect after upgrading an HP LeftHand P4500 or P4300 to BIOS version 2009.08.04 (A)

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c01959960
.

Re: P4300 G2 shutdown suddenly..

Hi..

Thanks for ur response..
But this is the new lefthand P4300, I've also checked the system already had the latest firmware..

Thanks
Piyadassi
teledata
Respected Contributor

Re: P4300 G2 shutdown suddenly..

Does the alert log show any indication of thresholds for anything that are out of spec?

You may want to setup monitoring from the CMC and collect performance and health stats to see if you see any odd numbers prior to the reboot.
http://www.tdonline.com

Re: P4300 G2 shutdown suddenly..

Hi..

Ya, in BIOS, there is message "Inlet Ambient Temperature -07C/20F"

I also believe, there is like sensor problem & the system shutdown automatically..

I don't have time to enter the CMC, because the system already shutdown..

Regards,
Piyadassi