P4300 iLO Port

[aaron martin]

How do you get to and cofigure the iLO ports IP Address on a new P4300?

Thanks for the help,

Aaron

[Paul Hutchings]

During boot up at the BIOS screen.  I don't recall the exact key press but you configure it like you would on a DL180, not through the CMC or any P4000 specific management tools.

[Bart_Heungens]

Hi,

To configure ILO, you need to push F8... Be aware however that also the ORCA (to configure the raid arrays) is also using F8 so you have to push at the right moment... So when you see ILO messages poping up, push F8...

Kr,

Bart