HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

P4500 architecture

 
SOLVED
Go to solution
bublik
Valued Contributor

P4500 architecture

I have P4500 G2 28.8 I would like to move my snapshots to a lower tier storage, is it possible with this model?

Can I add P4300 with 7200 RPM drives and configure P4500 to write all snapshots to that storage node?

 

3 REPLIES
ajamil786
Frequent Advisor

Re: P4500 architecture

You can add 4300s to the MG and make a second cluster. You can then use remote snapshots from 4500 to 4300.

Bart_Heungens
Honored Contributor
Solution

Re: P4500 architecture

Hi,

 

Yes this is possible with all P4xxx (Lefthand) models.

 

Only thing U need to do is create a second cluster which will be the other tier. When U make a snapshot U can choose the destination cluster to store the snapshots...

 

 

Kr,

Bart

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star" !
JohnMurrayUK
Advisor

Re: P4500 architecture

And don't forget you can also use the VSA's you got included with your 28.8TB SAN.  If you really want low tier storage, you can use some old servers with internal disks, throw ESXi on, and create Network-Raid 10 volumes using VSA's.

--------------------------------------------------------------------------------
If my post was useful, clik on my KUDOS! "White Star"