StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Re-Imaging NSM-160

Gregory J. Boehnlein
Occasional Advisor

Re-Imaging NSM-160

I have a few NSM-160 boxes that have been sitting in the lab for a while. I'm trying to upgrade them through the CMC to the latest 8.0 code, but when I attempt to do so, I am presented w/ a blank HP page.

I've tried to use my SanIQ 7 and 8 ISO images to field-image them, but the installation is failing w/ an "Invalid Unit Type 9" message. I can't seem to find any documentation on how to accomplish this task now that the Lefthand Networks web resources are gone.

Any suggestions?
6 REPLIES
Mike Povall
Trusted Contributor

Re: Re-Imaging NSM-160

Hi Gregory,

The original Lefthand web site is still there on www.lefthandnetworkslegacy.com.

SAN/iQ 8 for the NSM160 and the notes on the upgrade are available there.

Regards, Mike.
Gregory J. Boehnlein
Occasional Advisor

Re: Re-Imaging NSM-160

When I click on the Partner link and enter my authentication information, I am re-directed to an HP page that does not contain the information that I am looking for. It appears as if the entire partner portal has disappeared, even though the old site is still working. Any ideas on this?
Mike Povall
Trusted Contributor

Re: Re-Imaging NSM-160

Hi Gregory,

Rather than going via the partner login access the site via Services & Support, Customer Support Portal and select software downloads from the right hand pane. Everything should be available that way. I have just tried it and it is still working.

Regards, Mike.
BKeadle
Occasional Visitor

Re: Re-Imaging NSM-160

I was excited to discover in this thread that there is a http://www.lefthandnetworkslegacy.com/ website that I might be able to find previous software upgrades. However, the site isn't currently responding. Is it still available, or is there another resource? I'm trying to upgrade a 6.5 SANiQ on an NSM160 to 6.6.
Hauns
Occasional Visitor

Re: Re-Imaging NSM-160

I am getting this same message.  I have to re Field-Image 1 of my NSM160's.  I do not have these iso images or original CD's.  The images I downloaded from ftp://hprc.external.hp.com give me the same error message.

 

Can someone provide a valid Field Image ISO (v 6.6 or 7) for the NSM160?  Would GREATLY appreciate it?

PierrevdH
Occasional Visitor

Re: Re-Imaging NSM-160

I have the same issue. My Lefthand NSM 160 node broke down during the upgrade process. Because we have a demonstration unit, we don't have de recover cd's to restore. 

 

Can anybody help me to get a SAN/IQ recover CD version 7/8 iso?