StoreVirtual Storage
1748249 Members
3905 Online
108760 Solutions
New Discussion юеВ

Re: SANiQ_10.0.00.1888 - Lefthand P4300

 
hpunne
Occasional Advisor

SANiQ_10.0.00.1888 - Lefthand P4300

Hello, I have a problem trying to migrate from version 9.5 to 10 SANiQ, specifically in the team FailOver Manager FOM. The system generates a log, and ask that they contact the service center.
Someone can tell me how to proceed?
Thank you

7 REPLIES 7
David_Tocker
Regular Advisor

Re: SANiQ_10.0.00.1888 - Lefthand P4300

I had a problem upgrading the FOM (hyper-v) on our setup.

 

To avoid issues, I removed the FOM altogether, downloaded the latest FOM package from HP and reinstalled with the ver 10 from the outset.

 

After this, the P4300's upgraded fine (live, no downtime)

 

Might be worth considering...

Regards.

David Tocker
Emilo
Trusted Contributor

Re: SANiQ_10.0.00.1888 - Lefthand P4300

It is failing on the FOM.

/192.168.50.3:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : begin MAIN install_saniq.sh: Preparing for upgrade ...

/192.168.50.3:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : This is a virtual platform where LEGACY_VIRTUAL_UPGRADES=true (in common.sh)

/192.168.50.3:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Checking for minimum OS partition size for new software ...

/192.168.50.3:11120: Received an UpgradeScriptStatus message from the install server running on the node It was : Installing new software ...

 

I agree  with the previous post remove the FOM and install VM perform the upgrade and when complete re-install the FOM and it should be good to go.

 

If you want to trouble shoot check the size of the drives and how much memory it has. Let me know what those values are.

 

hpunne
Occasional Advisor

Re: SANiQ_10.0.00.1888 - Lefthand P4300

Hi David, i need to run FOM virtual machine into Esxi 5.1 .... I am seeking about HP link to download 10.0 new version , do you know about it ?

 

Thanks so much.

 

 

SMB
Frequent Visitor

Re: SANiQ_10.0.00.1888 - Lefthand P4300

Hello,

I am facing exctely the same issue.

I have tryed to increase RAM (3GB), CPU and disk space (10GB) as mentioned, but the result still the same.

Hyper-V server crash and FOM does not upgrade from 9.5 to 10.

Because I am not familiar with the HP download website I did not find the Latest FOM to download... somebody can tell me where I can find it?

Any other ideas to solve the issue?

Thanks a lot!

Regards

Moreno

vlho
Advisor

Re: SANiQ_10.0.00.1888 - Lefthand P4300

hpunne
Occasional Advisor

Re: SANiQ_10.0.00.1888 - Lefthand P4300

Thank you.

SMB
Frequent Visitor

Re: SANiQ_10.0.00.1888 - Lefthand P4300

Thanks Guys,

 

- I have downloaded the FOM 10.0.00.1888.0 from the link in the post.

 

-Uninstalled the FOM from the VSA Management group

 

-Uninstalled the old FOM (9.5)

 

-Installed the FOM 10.0.00.1888

 

-Add the new FOM in the VSA Management Group

 

-Patched the FOM successfully

 

Now it's working perfectly!

 

Cheers

 

Moreno