StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

StoreVirtual VSA 12.7 + VMware 6.5 iscsi rescan vib

IFICons
Occasional Contributor

StoreVirtual VSA 12.7 + VMware 6.5 iscsi rescan vib

Hi,

my situation:

StoreVirtual VSA 12.7 updated + VMware 6.5 + iscsi rescan vib (metadata-hpe-iscsi-rescan_6.5.0-12.7.0.7-offline_bundle)  for esxi 6.5 installed.

If the system start from poweroff (power on the host + power on VSA vm) the volume provided by VSA will not be available until i manually do rescan of the datastore and host storage adapters.

4 REPLIES
Ravi_K
HPE Pro

Re: StoreVirtual VSA 12.7 + VMware 6.5 iscsi rescan vib

Most likely issue with the MEM vib, i would recommend you to uninstall it if it is an option for you.

have seen several issues of vols not accessible when MEM is installed.

Regards

Ravi

Re: StoreVirtual VSA 12.7 + VMware 6.5 iscsi rescan vib

Hello IfiCons,

If unistalling MEM is not an option then i would open both VMWare and Storevirutal support cases in order tha we can ensure there is not any underlying configuration problem.

Francisco de la Torre Rodriguez
EMEA LHN CoE Engineer

If you feel this was helpful please click the KUDOS! thumb below!
mvbk
Occasional Advisor

Re: StoreVirtual VSA 12.7 + VMware 6.5 iscsi rescan vib

Good afternoon,

SInce the OP didn't mention the MEM vib was installed, I'm not really sure this is the general issue. I'm having the same situation with several installations so far. Only the iSCSI rescan vib is installed (not the MEM) on ESXi 6.5 U2, but the volumes do not come online after the VSA's are booted.

Are there any settings we need to change to make it work?

Kind regards.

ThanhDatVo
Occasional Advisor

Re: StoreVirtual VSA 12.7 + VMware 6.5 iscsi rescan vib

Hello,

Check if your scsi drivers are up to date. (scsi-hpdsa, scsi-hpda, scsi-hpvsa)
Maybe it could be resolved that way...?

Kind regards,

Thanh