StoreVirtual Storage

StoreVirtual controllers failed

 
JorgeCarvajalA
Occasional Contributor

StoreVirtual controllers failed

Hi,

I have a StoreVirtual 3200, both controllers failed after a shutdown, the equipment has no warranty or support, the storage is not critical only for laboratory use, you can help me with some procedure to restore the image of the controllers...

3 REPLIES 3
ArunKKR
HPE Pro

Re: StoreVirtual controllers failed

 

 

Hi,

 

Please refer to the store virtual 3200 user guide (Pages 119-125)  which has instructions on reimaging:

 

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c05244956

 

Store virtual management console user guide:

 

https://support.hpe.com/hpesc/public/docDisplay?docId=a00004043en_us

 

You would most probably need to log a support case for advanced troubleshooting/assistance if there are any challenges during the configuration.

 

Please note that if the controller or CF card hardware has failed remiaging would not help.

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

ArunKKR
HPE Pro

Re: StoreVirtual controllers failed

Hi Jorge,

 

Please let us know whether the information shared helped.

While I am an HPE Employee, all of my comments (whether noted or not), are my own and are not any official representation of the company

Accept or Kudo

JorgeCarvajalA
Occasional Contributor

Re: StoreVirtual controllers failed

Hi,

Sorry for the delay...

The sv3200 I have on hold for spare, I have a failure in one of the controllers: a cache failure.

The spare part is on the way... once I arrive I will continue the operation.

At least I already have an updated controller...