StoreVirtual Storage
1748142 Members
3700 Online
108758 Solutions
New Discussion юеВ

Re: VMFS VMWare UNMAP

 
coldfire3000
Occasional Advisor

VMFS VMWare UNMAP

Hi,

I have read that UNMAP is supported in more recent versions of the LeftHand OS but when I try and do this it shows delete status unsuported against all of the LUNS across the P4500's and P4335's we have.

The article I am following is: http://blogs.vmware.com/vsphere/2012/04/vaai-thin-provisioning-block-reclaimunmap-in-action.html

The command I run to see this is: 'esxcli storage core  device vaai status get -d  <naa>'

The LUN's are all configured as thin provisioned on the SAN so this should be supported as far as VMware goes. I am wondering if there is something I need to do in the CSM or if the LeftHand OS just does not support UNMAP?

Thanks

Chris

3 REPLIES 3
Thomas_SG
Advisor

Re: VMFS VMWare UNMAP

Hi Chris

Believe you have to use the following command

esxcli storage vmfs unmap -l <volume_name>

You have to run v12.0 or newer for this to work.

You also have to enable the feature somewhere in StoreVirtual CMC, but I cannot seem to find exactly where right now.

coldfire3000
Occasional Advisor

Re: VMFS VMWare UNMAP

To update this topic.

We had enabled the feature and were on the correct versions etc.

The issue we had is that when the feature was enabled, it didn't actually enable it on the array. This was apparently because we were too close to the limit on array memory. We were however within the recommended memory/data size as per the HP docs.

We had to contact support and after a while they logged in to the support CLI and changed some settings, we had to reboot the array and then the setting was shown as enabled correctly. After this UNMAP would work.

regi_p
Frequent Advisor

Re: VMFS VMWare UNMAP

https://vmfocus.com/2015/02/26/how-to-hp-storevirtual-lefthand-os-12-0-with-t10-unmap/

 

How To: HP StoreVirtual LeftHand OS 12.0 With T10 UNMAP