HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Hours:
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Will Failover Manager Service affect our P4500 SAN firmware upgrade?

 
CS23
Occasional Contributor

Will Failover Manager Service affect our P4500 SAN firmware upgrade?

I am using an HP Lefthand P4500 SAN. it is currently on firmware version 9 and needs to be upgraded to v11.5.

 

The san currently has two nodes operating within a cluster. We would like to confirm the following:

 

The failover manger service on the SAN appears to be enabled, would this cause a problem and should it be enabled when the san is operating with both nodes correctly?

 

Thanks

 

 

P.S. This thread has been moved from Storage Area Networks (SAN) (Small and Medium Business) to HP StoreVirtual Storage / LeftHand. - Hp Forum Moderator

1 REPLY
giladzzz
Honored Contributor

Re: Will Failover Manager Service affect our P4500 SAN firmware upgrade?

Hi

your question is unclear if you have a fail over manager FOM it will be upgraded too with your cluster

if you don't you should have one. or at least a virtual manager running on one of the nodes.

Regards