StoreVirtual Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

cnfigur ip redirct on 10g Modules

malaz
Occasional Contributor

cnfigur ip redirct on 10g Modules

I installed the 10g HW and correspoinding SW and i can see them in my system. What i use the 10g Modules for iscsi traffic and i want to use ip redirection. I am having poblem with that. If disable both 1g interfaces, i won't be able to discover the node. I i enable the first 1g interface fo mgmt, virtual ip will redirect traffic to 1g ip , how can i force redirection for the 10g module ? This is in a test lab ad not on production so i am open for suggections. Assumin Virtual ip is the redirect !! Right ??
2 REPLIES
Olvi_1
Frequent Advisor

Re: cnfigur ip redirct on 10g Modules

Hi!

"If disable both 1g interfaces, i won't be able to discover the node"
Stupid question but did you give IP address to 10gb?

10gb interface should work just like 1gb nics except faster and you should no need any redirections. Correct me if i'm wrong!

Bryan McMullan
Trusted Contributor

Re: cnfigur ip redirct on 10g Modules

I don't believe you can assign one interface for management and another for iSCSI traffic. You would just use the 10g interfaces for both. Assign the IP to the 10g's and plug them in and you should be good to go.