StoreVirtual Storage
1748027 Members
4888 Online
108757 Solutions
New Discussion юеВ

where can I set P4300G2 auto start

 
veekoyin
New Member

where can I set P4300G2 auto start

Dear Expert,

I've HP StorageWorks P4300 G2 SAN, consist 2 Node of P4300 G2.

Both of them connecting UPS.

One day power outage, one node will auto start when power back, but the other one can not auto start.

So, where can I find to set the other node auto start? Is it in the BIOS setting?
BTW, how can I access to the node's bios?


Need ur help..

Regards,
veeko
3 REPLIES 3
teledata
Respected Contributor

Re: where can I set P4300G2 auto start

Yes, those settings should be in the HP BIOS.

You will need to use the iLO or a local console connection to make a change to the BIOS setting. If I recall it is F9 during bootup to access the BIOS.
http://www.tdonline.com
Cajuntank MS
Valued Contributor

Re: where can I set P4300G2 auto start

Don't mean to hijack your thread, but a follow up question for someone. Is there some gracefull auto shutdown process that can be implemented to tie to a UPS (APC), that's supported and or documented?
Cajuntank MS
Valued Contributor

Re: where can I set P4300G2 auto start

"Don't mean to hijack your thread, but a follow up question for someone. Is there some gracefull auto shutdown process that can be implemented to tie to a UPS (APC), that's supported and or documented"

Duh... it was in front of me the whole time. Please disregard.

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c01805622/c01805622.pdf