Switches, Hubs, and Modems
1747971 Members
3686 Online
108756 Solutions
New Discussion юеВ

reset username/password on procurve switch 2824?

 

reset username/password on procurve switch 2824?

Hello,

is it possible to clear/reset the username and password on a hp procurve switch 2824 (J4903A)?

I already tried to hard reset it by pushing the RESET & CLEAR-Buttons, but that didn't work...

I want to update the switch and can't login.

Thanks for your advice in advance, cheers,
Alex
3 REPLIES 3
SCOOTER
Esteemed Contributor

Re: reset username/password on procurve switch 2824?

Hello Alex,

It should work with a hard reset... Try pushing the clearbutton for 10 sec. That is the usual way to clear all passwords.

Could be that the reset and/or clearbutton are broken.
Did all the leds come on when you did a hard reset? Does the switch reboot when you push the resebutton? If not then call support for an exchange.

Regards,

SCOOTER

Re: reset username/password on procurve switch 2824?

Hi Scooter,

thanks for your tips.
But i tried them, too. It didn't work.
The buttons are alright, because after pressing RESET the systems reboots.

Anymore ideas?

If i somehow find a solution, i'll post it.

Thanks,
Alex
Dmitry G. Spitsyn
Trusted Contributor

Re: reset username/password on procurve switch 2824?

Hi Alex !

It is required only to depress CLEAR button for at least 1 second to remove operator and manager passwords.

If you like to perform reset to factory default configuration simultanuously depress RESET & CLEAR buttons and CONTINUE to press CLEAR button while releasing RESET button.
After the Self Test LED begins to flash, release the CLEAR button.

Good luck,
Dmitry