HPE Community
Switches, Hubs, and Modems
1752795 Members
5765 Online
108789 Solutions
New Discussion юеВ

Re: 2600 series H.10.45 causes SNMP security access violation

 
Chad Strunk
New Member

тАО10-01-2007 04:55 AM

тАО10-01-2007 04:55 AM

2600 series H.10.45 causes SNMP security access violation

I upgraded my 2600 series switches to H.10.45 over the weekend via PCM+. All is okay except PCM+ cannot talk to the switches with SNMP. In PCM+, a communications test says "Authorization Failure", and on the switches I have "SNMP security access violation from " errors in the event log. Everything worked okay before the upgrade, and a 2600 series switch that was not upgrades still responds to PCM+.
0 Kudos
3 REPLIES 3
Matt Hobbs
Honored Contributor

тАО10-01-2007 08:16 PM

тАО10-01-2007 08:16 PM

Re: 2600 series H.10.45 causes SNMP security access violation

Are you using SNMPv3 by any chance? If so I think you might have stumbled across a new bug. You should let HP support know about it.
0 Kudos
Chad Strunk
New Member

тАО10-02-2007 02:16 AM

тАО10-02-2007 02:16 AM

Re: 2600 series H.10.45 causes SNMP security access violation

Why, yes, yes I am...and I think I'll do just that.
0 Kudos
Chad Strunk
New Member

тАО10-02-2007 06:51 AM

тАО10-02-2007 06:51 AM

Re: 2600 series H.10.45 causes SNMP security access violation

UPDATE: I changed PCM+ to use SNMPv1/v2 and now PCM can talk to them.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.