Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

2600 series H.10.45 causes SNMP security access violation

Chad Strunk
Occasional Visitor

2600 series H.10.45 causes SNMP security access violation

I upgraded my 2600 series switches to H.10.45 over the weekend via PCM+. All is okay except PCM+ cannot talk to the switches with SNMP. In PCM+, a communications test says "Authorization Failure", and on the switches I have "SNMP security access violation from " errors in the event log. Everything worked okay before the upgrade, and a 2600 series switch that was not upgrades still responds to PCM+.
3 REPLIES
Matt Hobbs
Honored Contributor

Re: 2600 series H.10.45 causes SNMP security access violation

Are you using SNMPv3 by any chance? If so I think you might have stumbled across a new bug. You should let HP support know about it.
Chad Strunk
Occasional Visitor

Re: 2600 series H.10.45 causes SNMP security access violation

Why, yes, yes I am...and I think I'll do just that.
Chad Strunk
Occasional Visitor

Re: 2600 series H.10.45 causes SNMP security access violation

UPDATE: I changed PCM+ to use SNMPv1/v2 and now PCM can talk to them.