Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

2650 Stack Access Problem

Carl Morss
Occasional Advisor

2650 Stack Access Problem

Scenario:
I have various 2650 switch stacks on site, and can access any member switch from telnet to commander switch then select member number in stack.

I have recently put in another 2 x 2650 stack and cannot access the member switch from the commander, the commander just hangs.

I think I have traced this down to my existing stacks all being on H.08.02 ROM Ver with latest firware H.10.67.swi, whereas my newly installed 2650's came preloaded with H.08.05 Boot Rom..

Question:
So - is it possible that this is the cause?
is it also possible to downgrade a Boot ROM?
and if so how do i downgrade my Boot ROM versions back to H.08.02

2 REPLIES
cenk sasmaztin
Honored Contributor

Re: 2650 Stack Access Problem

hi Carlos
each ProCurve switch sperately commander
also stack member
cenk

Carl Morss
Occasional Advisor

Re: 2650 Stack Access Problem

?????