Switches, Hubs, and Modems
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: 2650 Vlan and routing setup

 
SOLVED
Go to solution
Honored Contributor

Re: 2650 Vlan and routing setup

your static route commad is wrong (on internet router)

static ip route command must have

ip route 192.168.0.0 255.255.0.0 192.168.10.249

and all vlan member client default gateway address must have vlan ip address
cenk

Occasional Advisor

Re: 2650 Vlan and routing setup

Hi cenk sasmaztin I tried that and still got no joy so i am still stuck if anyone has any thoughts on this let me know

Thanks Dean
Trusted Contributor

Re: 2650 Vlan and routing setup

ok,
the default gateway for your test client needs to be:
Ip 192.168.13.28
Subnet 255.255.255.0
Gway 192.168.13.249

the client must be attached to an untagged port of vlan "green" .

then try to ping 192.168.13.249 from the client, if this works ping 192.168.10.249
if this works routing at the switch is working fine.
at last ping 192.168.10.1 to see if the internetrouter is working correct.
hth
alex
Occasional Advisor

Re: 2650 Vlan and routing setup

Thanks for the help Guys its now fully working like i said Thanks for the help
Occasional Advisor

Re: 2650 Vlan and routing setup

Each point was valid and the solution was adding up all the posts and implementing them

Thanks